Untitled Document

The New York State model shares a unique trigger guard and internal mechanism with the 1871 Springfield contract rifle. These two rifles have a safety system built in that requires the hammer to be re-cocked after the breech block is closed. The parts in these trigger guards do not interchange with any other rolling block. Both the trigger and locking levers have two parts. The hammers are machined the same on the lower end. The NY State Hammer is significantly taller than other rolling blocks and is the most readily identifiable feature of this model. The firing pin retractor on the NY State model is unique to this rifle, the late #1 model retractor is not interchangeable. The late rotary extractor can be used however fitting may be required.

Part #	Description	Price
1S	Guard Screw (Military)	$6.00
	Locking lever pin	$3.00
	Main Spring	$22.00
	Main Spring Mounting Screw - original - $3 when ordered w/ the spring	$6.00
1T	Pin Retainer Plate aka Button	$20.00
1D	Pin Retainer Plate Screw ($3 when ordered with button)	$6.00
	Tang screw	$10.00
	Cleaning Rod for the NY State Rifle	$35 - $5.35 S&H
	Trigger Sear, mounts to the right of the trigger on the trigger mounting pin.	$17.50
	Trigger, mounts to the left of the trigger sear on the pin below	$17.50
	Trigger/Sear mounting pin	$3.00

NOTE - Parts not listed above may be listed on the Original Parts Page subject to availability

**NOTE - These parts are furnished in the white and have not been heat treated

When ordering the above parts please order by the part description. The part numbers are for illustration only and do not reflect any inventory control number. Shipping for the parts above will be charged as $2.00 for the first part and an additional .50 for each additional part. Payment may be made by check or money order payable to G. S. Womack, 5100 Garden Valley Rd. Garden Valley, CA 95633.

Remington Rolling Block New York State Model