Rolling Block Original Parts

Description

Price

 Breech Block for Navy Arms Rolling Block Rifle.  This block is in excellent condition w/ full color case.  This will not fit the original Remington RB receivers.

  $95 - $2.50 S&H

Breech Block for a # 1 1/2 sporting rifle. This rim fire block is complete with firing pin and firing pin mounting screw. The block retains the majority of it's original blue. the block is in very good condition most of the wear amounts to the light ring on the block face and some thinning of the original finish.

$150.00- $3.00 S&H

#6 Breech Block bare. This is as nice a breech block as we have seen. Some color case still in evidence. A smooth block face no pitting or erosion.

$95- $3.00 S&Ins

Need a new breech block fitted to your full size rolling block rifle? Contact Dave Higgenbotham at Lone Star Rifle Co. 936-228-2448

Hammer for a #6 falling block boys rifle. This Hammer has the bordered checkering pattern on the hammer thumb piece. This part will not fit the number 6 Improved. 

 $45 - $2.50 S&H

 #1 RB Hammer. There are different hammer spur angles available. Hammers may have worn checkering on the hammer spur.

$45- $2.50 S&H

 #1 Danish Hammer. This hammer has the appropriate crown inspector marking on the left side. The hammer is bright white on the upper (exposed) portion and has thinning blued finish on the portion that would be internal to the receiver. The checkering on the hammer spur shows very little wear. This is a very good condition hammer. 

$65 - $2.50 S&H

Trigger for the #4 RB rifle. This is an original trigger in very good condition. It fits all models of the #4 rifle.

$35

Extractor for a #4 model RB chambered for .22 caliber.  This extractor is cut for the small tip firing pin. It has some surface pitting from age and exposure to corrosive powder and priming compounds. We also have new manufactured blanks see the #4 page.

$35

Barrel mounted Recoil lug w/ original mounting screw for large frame Military RB

$12

Ram rod, Cleaning Rod Stop for the early production #1 military rolling block rifle. If your receiver has a threaded hole in the bottom of the receiver ring this is the proper rod stop for your rifle. If the receiver has two slots in the inner receiver wall at the bottom front of the receiver then you need the late style rod stop.

$6

Ram Rod Stop for the late #1 and #5 Military RB rifles. If your receiver has two slots just inside the front of the Receiver on the inner side walls this is the rod stop that works for your rifle.

$6

Swede sporting model Butt plate. Mounting screws can be purchased separately if needed.

          $35- $2.50 S&H

Butt Plate for the 1902/1910 #5 military rifle. Inquire for photo or condition.

 $35 - $2.50 S&H

 Butt plate for an early #1 military rifle. Inquire for photo or detailed description.

 $35 - $2.50 S&H

 $70 - $4.95 S&H

$70 - $4.95 S&H

#1 Military butt stock mounted rear sling swivel.

$15

Butt Stock Sling Swivel for the #5 Military RB. This is the bottom mounted swivel.

$15

Bayonet, socket style bayonet for the military export rifle that does not have the long lug attached to the right side of the muzzle. These bayonets use the front sight as a mounting lug. If you rifle has the short bayonet lug mounted near the forend tip these bayonets will work as well as the saber style bayonet.

H $90 - S&H $10

Barrels.  We have a nice original barrel for each of the following: #5 carbine 7mm, 1910 rifle 7mm, 8x58R Sporting Model, 1867 Navy Carbine, 1897 Rifle 7mm

POR

Barrel Stubs. Gunsmiths, if you need a barrel stub to duplicate thread pattern or locate extractor cuts contact us.

Trigger Guard with sling swivel, New York State Rifle. This guard is in very good condition, the swivel is not distorted or worn. Except for a small spot of shallow pits on the left rear bottom of the guard there is no pitting on this part. There are no internals in this trigger guard. The interior machine inletting in the New York State trigger guard is unique to the 1871 and NY State contracts. Other #1 trigger guards are not interchangeable w/ these models. We have other NYS or 1871 Army guards available POR.

$100

$4.80 S&H

  Trigger Guard, #1 military contract rifles. We have several of these available . Photos of individual guards will be available by request. 

  $40 - $2.50 S&H

  Trigger Guard, 1902/1910. This trigger guard is the one drilled and tapped for an extractor spring on the top of the left side of the guard.  This spring powers the extractor in the 1902/1901 model. Contact us for photos of individual units.

 $40 - $4.80 priority mail 

 Trigger Guard for a Spanish Oviedo rolling block military rifle. These rifles are easily identified by the stampings on the right side of the receiver. A crown over the letters ARO over the date of manufacture. The Oviedo rifle internal parts are about .045 wider than the similar Remington part and do not interchange.  The rifles were typically chambered in the .43 Reformado cartridge.

$40.00 - $2.50 S&H

 Locking Lever Spring. This spring will fit all the large frame Remington rolling block rifles. It is mounted in the front of the trigger guard and provides tension from under the locking lever. We also have the proper mounting screw for this spring.

         $10

 #5 Barrel Band Retaining Spring.  This is the spring mounted on the right side of the #5 military rifle forend just in front of the rear band.

 $7.50

 Forend, Swede sporting rifle.  This forend is complete with the barrel under lug and cross mounting screw. It does not include the vertical under barrel  mounting screw. This forend is similar to the one on my 8x58R Swede Sporting Rifle.

$45 - 4.80 priority mail

Forend for #5 Remington military RB rifle. Complete with tip and barrel band spring. The tip is made w/ an  integral bayonet lug on this model. Will fit all of the #5 models from 1897 to 1910.  We have several in Stock. Call for color and condition.

from $65 - $7.50  S&H

Forearm. This is the forend for the tapered octagon version of the #4 rifle. It is complete w/ the escutcheon.

        $45 - $2.50 S&H      

  Forearm, #4 rolling block, late round barrel takedown model. This forearm is in very good condition with what appears to be a varnish finish. there is no metal escutcheon in this forearm. There are two or three light scratches in the finish on the right side near the area of the mounting screw hole. The white mark on the wood is a taped ID label that will be removed prior to shipping.

 $45 - $2.50 S&H

  Forarm,1 1/2 Sporting Rifle with ebony wedged Schnabel tip. This forearm is shaped for an octagon barrel. The metal escutcheon for the mounting screw is in place. The finish is dark. there are a number of small dents dings etc from handling and use. There are no breaks or cracks nor any pieces missing. 

 $75 - $2.50 S&H

 $75 - $2.50 S&H

 $75 - $2.50 S&H

  Upper hand guard with rear metal band for a #5 1910 model rolling block rifle The hand guard has a dark oil finish.

 $50 - $2.50 S&H

  Upper hand guard for #5 1902 model rolling block rifle.  The finish is a dark oiled surface. Hand guards that are not cracked or broken are not easily located.

 $45 - $2.50 S&H

 $15

Barrel Bands. We have the front and rear bands for most of the common military three band Remington rifles and some of the Oviedo bands.

plain- $10, w/ screw- $15,  w/ swivel $20

 Barrel Band set for a #5 1902 or 1910 military Remington rolling block rifle. The front band has the hollow hex head screw and mounted sling swivel. These bands are fully functional and come with both barrel band screws. They are grey metal finish. Individual bands are available. We also have parts for restoring your incomplete or broken band. The front band with swivel is available separately for $25.

$40.00 - $2.50 S&H

 $50- $2.50 S&H

Forend tip with integral bayonet lug and mounting screw for a #5 rolling block Rifle. 

$15.00 - $2.50 S&H

Forend tip and mounting screw for a #1 Remington rolling block rifle.

$12.50 - $2.50 S&H