Remington Rolling Block No.1
The #1 Remington rolling block rifle is also known as the black powder cartridge rifle. Produced by Remington in both military and civilian models from 1866 to 1896 these large frame rolling block production totaled well over 1 million rifles with a number of variations. Illustrated here are examples of the common variations encountered. The early #1 with it's bar extractor, the late #1 or rotary extractor receiver, as well as the large frame black powder cartridge sporting rifles. The parts layouts below will assist in the identification of both model and part identification.
No.1 Straight Bar Extractor
No.1 Sporting
|
No.1 Rotary Extractor
No.1 1/2 Sporting
|
Part # |
Description |
Price |
- |
Butt Plate Casting #1 Sporting Model. this part requires finishing and drilling the pre spotted holes. |
$50.00 |
1A |
Firing pin for black powder action with rotary extractor. Not for New York State or 1871 Army. |
$20.00 |
1X |
Extractor, Rotary (Late #1) extractor cut for .43 Spanish Remington cartridge |
$35.00 |
1E |
Straight Bar Extractor for the .50-70, 45-70, or 38-55 case. These extractors are based on a .975 diameter barrel shank. Please specify cartridge when ordering. |
$50.00 |
1E |
Straight Bar Extractor for 22 rim fire case |
$50.00 |
1F |
Extractor Retaining Screw This screw is not correct for the 1870 Navy contract rifles. |
$6.00 |
1Y |
Firing Pin Retractor (late #1) |
$12.00 |
1Z |
Firing Pin Retractor Mounting Pin |
$3.00 |
1B |
Firing Pin Retaining Screw (early production breech blocks) |
$6.00 |
- |
Forend tip Casting. #1 early Sporting model forend tip. this part needs to be finished. |
$35.00 |
1S |
Guard Screw (military) |
$10.00 pair, $6.00 each |
- |
#1 sporting model rear Guard Screw, (two on each receiver) not pictured. |
$10.00 pair, $6.00 each |
1K |
Locking Lever** |
$20.00 |
1J |
Locking Lever Mounting Pin |
$3.00 |
1Q |
Main Spring |
$30.00 |
1R |
Main Spring Screw ($3 when ordered with the spring) |
$6.00 |
1T |
Pin Retainer Plate (aka button) |
$20.00 |
1D |
Pin Retainer Plate Screw ($3 when ordered with button) |
$6.00 |
- |
Rear Barrel Sight Mounting Screw (original sporting model, not pictured) |
$10.00 pair, $6.00 each |
- |
Rear Sight Mounting Screw (#1 Carbine) ($3 when ordered with the sight) |
$6.00 |
- |
Saddle Ring Carbine Staple (not pictured) |
$45.00 |
- |
Saddle Ring Carbine Staple Mounting Screw (not pictured) |
$10.00 |
1U |
Tang Screw (please specify military or Sporting model as the length is different) |
$10.00 |
- |
Trigger return spring kit- aftermarket return spring to reduce trigger pull, the best. |
$20.00 |
1M |
Trigger** |
$35.00 |
- |
Cleaning rod for the Modelo Argentino 1879 military rifle (same rod as most 11mm military rifles) |
$40.00 UPS $25 S&H USPS $40 available |
- |
Barrel band screw for 1879 Argentine model ($10 a set when ordered w/ the nut below) |
$6.00 |
- |
Barrel band nut for the 1879 Argentine, this is the round nut unique to this model |
$5.00 each, $12 set of 3 |
- |
Barrel Band Screw for late #1 military rifle barrel bands |
$10.00 pair, $6 each |
- |
Hex head hollow barrel band screw for the swivel mounted middle band of the late #1 military rifle |
$6.00 |
1L |
Trigger Mounting Pin |
$3.00 |
- |
#1 1/2 Sporting Model Hamer This is a finished hammer from Lone Star Rifle Company. The receiver pin hole has been reamed the diameter of original factory production. ( I have used them in both military and sporting model receivers) The hammer is not cut for a fly but can be used for a #1 sporting rifle without a set rigger option. |
$120 |
- |
#1 1/2 Sporting Rifle Hammer Casting From Lone Star Rifle Co. This casting is easy to finish. It needs the receiver pin hole to be reamed to the diameter of your individual receiver (usually about an additional .006) |
$60 |
- |
Note: Saddle Ring for the RB saddle ring carbine.(not illustrated) This part is an exact reproduction of the Remington saddle ring including the rod diameter as well as the outside ring diameter. There is no weld seam on these rings. |
$12 |
- |
- |
Value |
*NOTE - Parts not listed above may be listed on the Original Parts Page and are subject to availability.
**NOTE - These parts are furnished in the white and have not been heat treated (use Kasenit - Brownells)
**NOTE - These parts are furnished in the white and have not been heat treated (use Kasenit - Brownells)
When ordering the above parts please order by the part description. The part numbers are for illustration only and do not reflect any inventory control number. Shipping for the parts above will be charged as $5.50 for the first part and an additional .50 for each additional part except where noted otherwise.
Payment may be made by check or money order payable to Kenn Womack, 7343 Annette Ave. Fallon, NV 89406
Payment may be made by check or money order payable to Kenn Womack, 7343 Annette Ave. Fallon, NV 89406