Remington Rolling Block No.6
The #6 is not a true rolling block. It is a small scale falling block boys rifle. The photo on the left is an example of the latest production #6 rifles. Earlier variations did not have the model number or company address information on the left side of the receiver. The #6 Improved while similar in appearance has different internals that are not interchangeable with the #6. We have selected the #6 parts photo plate from a Frank de Haas book for illustration as we do not supply any Improved model parts.
No.6
|
No.6 Improved
|
Photo plate taken from Single Shot Rifles and Actions By Frank de Haas
Part # |
Description |
Price |
6Q |
Main Spring |
Out of Stock |
6N |
Tigger Spring (see Wisner's for #6 springs) |
Out of Stock |
6R |
Mainspring and Trigger Spring Mounting Screw |
$6.00 |
6A |
Firing Pin |
$20.00 |
6C |
Breech Block Pin |
$3.00 |
6F |
Extractor Retainer Pin |
$3.00 |
6G |
Hammer Pin |
$3.00 |
6D |
Take Down Screw |
$15.00 |
- |
Butt Plate with or without Logo (furnished in the white) Rifles Marked Remington Arms Co use a plain plate. Remington - Union Metallic Cartridge Co came with logo |
$30.00 |
- |
Screw Set for #6 Butt Plate |
$10.00 set, $6.00 each |
- |
Butt Stock Through Bolt (different head slot than original, not pictured) |
$5.00 |
- |
Adjustable Rear Sight (screw elevator style) furnished in the white |
$45.00 out of stock |
- |
Rear Sight Adjustment Screw for elevation rear sights |
$3.00 |
6B |
Thumb Piece (Firing Pin Retaining Pin) |
$5.00 |
- |
Tang Sight. Flip-up sheet metal factory optional sight. Blue steel finished (available in White $45) |
$50.00 |
- |
Tang Sight Mounting Screw |
$3.00 |
- |
Forend Mounting Screw |
$6.00 |
6J |
Tigger Pin |
$3.00 |
*NOTE - Parts not listed above may be listed on the Original Parts Page and are subject to availability.
When ordering the above parts please order by the part description. The part numbers are for illustration only and do not reflect any inventory control number. Shipping for the parts above will be charged as $5 for the first part and an additional .50 for each additional part except where noted otherwise.
Payment may be made by check or money order payable to Kenn Womack, 7343 Annette Ave. Fallon, NV 89406
Payment may be made by check or money order payable to Kenn Womack, 7343 Annette Ave. Fallon, NV 89406