Rolling Block Original Parts
*Original parts are subject to availability, please contact us prior to ordering*
In the interest of faster upload speed we have removed photos for items with basic descriptions that may be self explanatory.
We will provide photos of any needed part for your consideration upon request.
In the interest of faster upload speed we have removed photos for items with basic descriptions that may be self explanatory.
We will provide photos of any needed part for your consideration upon request.
Item Description |
Price |
Bayonets I typically have the 1867 Danish (saber), standard export socket that fits most 11mm with no saber bayonet rib, the saber style for 11mm with the saber rib (no 1879s), and the sword type for the smokeless powder cartridge rifles (#5). |
POR |
#6 Breech Block bare. This is as nice a breech block as we have seen. Some color case still in evidence. A smooth block face no pitting or erosion. Other #6 breech blocks with varying finish available at lower prices. |
$95.00 |
Hammer for New York State Rifle |
$100.00 |
Hammer for a #6 falling block boys rifle. This Hammer has the bordered checkering pattern on the hammer thumb piece. This part will not fit the number 6 Improved. |
$45.00 |
Military RB Hammer. There are different hammer spur angles available. Hammers may have worn checkering on the hammer spur. Call for condition and price |
POR |
1867 Danish Hammer. This hammer has the appropriate crown inspector marking on the left side. The hammer is bright white on the upper (exposed) portion and has thinning blued finish on the portion that would be internal to the receiver. The checkering on the hammer spur shows very little wear. This is a very good condition hammer. |
$75.00 |
Trigger for the #4 RB rifle. This is an original trigger in very good condition. It fits all models of the #4 rifle. |
$40.00 |
Barrel mounted Recoil lug w/ original mounting screw for large frame Military RB |
$12.00 |
Ram rod, Cleaning Rod Stop for the early production #1 military rolling block rifle. If your receiver has a threaded hole in the bottom of the receiver ring this is the proper rod stop for your rifle. If the receiver has two slots in the inner receiver wall at the bottom front of the receiver then you need the late style rod stop. |
$10.00 |
Ram Rod Stop for the late #1 and #5 Military RB rifles. If your receiver has two slots just inside the front of the Receiver on the inner side walls this is the rod stop that works for your rifle. |
$10.00 |
Swede 1868 and 1889 model Butt plate. (will have a SN stamped on the top) |
$35.00 |
Butt Plate for the 1902/1910 #5 military rifle. Inquire for photo or condition. |
Out of Stock $35.00 |
Butt plate for an early #1 military rifle. Inquire for photo or detailed description. |
Out of Stock $35.00 |
Butt Plate Casting for a #1 Sporting Model Rifle. |
$50.00 |
Butt Plate Casting for the #2 Sporting Rifle. |
$50.00 |
#1 Military butt stock mounted rear sling swivel. |
$20.00 |
Butt Stock Sling Swivel for the #5 Military RB. This is the bottom mounted swivel. |
$20.00 |
Screw Sets for sling swivel or butt plate. please specify model. Less expensive after market iron screws also available. |
$10.00 |
Barrel, 1868 Navy Carbine. Original unmolested barrel with navy anchor. Chamber .50-45 carbine. Front sight still mounted, no rear sight or recoil lug. Excellent bore. |
$225 plus $10.00 S&H |
Barrel, Model 1889 Swede barrels 8x58R |
$125.00 + $10.00 S&H |
Barrels. original barrel for many of the following: #5 carbine 7mm, 1902 & 1910 rifle 7mm, 8x58R Sporting Model, .43 Spanish and Egyptian, 1897 Rifle 7mm |
P.O.R |
Barrel Stubs. Gunsmiths, if you need a barrel stub to duplicate thread pattern or locate extractor cuts contact us. |
$7.50 |
Trigger Guard with sling swivel, New York State Rifle, or 1871 Army. There are no internals in this trigger guard. The interior machine inletting in the New York State trigger guard is unique to the 1871 and NY State contracts. Other #1 trigger guards are not interchangeable w/ these models. |
$100 + shippiong at cost |
Trigger Guard, #1 military contract rifles. We have several of these available . Photos of individual guards will be available by request. |
$60.00 |
Trigger Guard, 1902/1910. This trigger guard is the one drilled and tapped for an extractor spring on the top of the left side of the guard. This spring powers the extractor in the 1902/1901 model. Contact us for photos of individual units. |
$60.00 |
Trigger Guard for a Spanish Oviedo rolling block military rifle. These rifles are easily identified by the stampings on the right side of the receiver. A crown over the letters ARO over the date of manufacture. The Oviedo rifle internal parts are about .045 wider than the similar Remington part and do not interchange. The rifles were typically chambered in the .43 Reformado cartridge. |
$50.00 |
Locking Lever Spring. This spring will fit all the large frame Remington rolling block rifles. It is mounted in the front of the trigger guard and provides tension from under the locking lever. We also have the proper mounting screw for this spring. |
$10.00 |
#5 Barrel Band Retaining Spring. This is the spring mounted on the right side of the #5 military rifle forend just in front of the rear band. |
$7.50 |
1867 Danish contract Breech Block This block is unique to this contract with it's firing pin retractor and complex firing pin. Stripped block $125 |
$175 |
Forend for #5 Remington military RB rifle. Complete with tip and barrel band spring. The tip is made w/ an integral bayonet lug on this model. Will fit all of the #5 models from 1897 to 1910. We have several in Stock. Call for color and condition. |
From $65 + $8 S&H |
New York State Breech Block. This block is unique to the New York State contract. The extractor and firing pin retractor are only found on this one rifle system. |
$200 +$10 S&H |
X |
$ |
Forearm. This is the forend for the tapered octagon version of the #4 rifle. It is complete w/ the escutcheon. |
$50.00 |
X |
$ |
ACTION 1879 Black Powder Cartridge, rotary extractor. Standard .970 thread thick ring that is idea for milling the sporting style octagon receiver ring.Trigger spring kit installed to lighten the trigger pull. Front and rear fins removed to accomodate easier stock inletting. No FFL required for transfer |
$365 + $10 S&H |
ACTION 1875 black powdder cartridge, rotary extractor. This is a bit rare for BPC actions, it has the 1.055 barrel thread that later became the standard for smokeless powder cartridge actions. Trigger spring kit installed to lighten the trigger pull. Round top receiver ring that may not be thick enough to mill to an octagon shape. Three digit sn stamped on the left side of receiver (upside down) No FFL required for transfer. |
$350 + $10 S&H |
Upper hand guard with rear metal band for a #5 1910 model rolling block rifle. Typically these hand guards have some type of crack adjacent to the sight opening. |
$55.00 |
Upper hand guard for #5 1902 model rolling block rifle. Hand guards that are not cracked or broken are not easily located. |
P.O.R. |
Barrel Band #5 1897 rear band. This is the band that traps the front end of the forend as opposed tot he 1902 which allows the forend to extend through the band. |
$15.00 |
Barrel Bands. We have the front and rear bands for most of the common military three band Remington rifles and some of the Oviedo bands. |
P.O.R |
Barrel Band set for a #5 1902 or 1910 military Remington rolling block rifle. The front band has the hollow hex head screw and mounted sling swivel. These bands are fully functional and come with both barrel band screws. They are grey metal finish. Individual bands are available. We also have parts for restoring your incomplete or broken band. The front band with swivel is available separately for $30. |
$45.00 |
#1 Sporting Model Forend Tip. This is the proper tip for the full size #1 or #1 1/2 sporting rifles. It will require some finishing |
$35.00 |
Forend tip with integral bayonet lug for a #5 military rolling block Rifle. (the long thin Mounting Screw available separately) |
$15.00 |
Forend tip for a #1 Remington military rolling block rifle. |
$12.50 |
Complete Black Powder Cartridge Action. (FOUR) Straight bar extractor. All buggered or broken screws and springs have been replaced. The action is checked for function to insure it operates as manufactured. We do not bush the firing pin holes or install small tip firing pins in these actions. This price includes the tang screw. These actions were manufactured prior to 1899 so no FFL is required for purchase except in the State of N.J. |
$350.00 + $15.00 S&Ins |
Complete Smokeless Powder Cartridge Action. Both the straight bar and rotary style actions are available. All buggered or broken screws and springs have been replaced. The action is checked for function to insure it operates as manufactured. This price includes the tang screw. FFL or C&R is required for purchase |
$400.00 + $15.00 S&Ins |
#1 1/2 Sporting Model Breech Block Casting These are from the Lone Star Rifle Company. A nice casting that principally needs the firing pin channel cut and retaining screw hole cut counter sunk, and tapped. (A cross pin could be substituted) |
$60 |
#1 1/2 Sporting Model Hammer Casting These are from the Lone Star Rifle Company. A nice casting easliy finished, needs the receiver pin hole reamed to final dimension to match your receiver. (usually about .006 larger than cast.) |
$60 |
Breech Block for New York State Contract Rifle This block is unique to the NYS contract. |
$200 |
Action, 1889 Swede. Rebuilt in '89 by Sweden for their smokeless powder 8x58R cartridge. Upgrades included new breech block and hammer, a change in the extractor system, along with new heat treating. In stock actions include both Husqvarna and Carl Gustav (locking screws on the receiver pins). No FFL required for transfer except New Jersey |
$350 $15 ship and insure |
When ordering the above parts please order by the part description. The part numbers are for illustration only and do not reflect any inventory control number. Shipping for the parts above will be charged as $4 for the first part and an additional .50 for each additional part except where noted otherwise.
Payment may be made by check or money order payable to Kenn Womack, 7343 Annette Ave. Fallon, NV 89406
Payment may be made by check or money order payable to Kenn Womack, 7343 Annette Ave. Fallon, NV 89406