Remington Rolling Block Sights

When ordering the above parts please order by the part description. Shipping for the parts above will be charged as $3 for the first part and an additional .50 for each additional part except where shipping is otherwise noted.
Payment may be made by check or money order payable to Kenn Womack, 7343 Annette Ave. Fallon, NV 89406

Rear Barrel Sight for a late #1 military rifle.

This is the sight with open V notch on both the ladder and the slider. White metal base is not pitted below the wood line. Ladder has distinct markings and slider works well. We have ladder springs for this sight $15.00. We also have the peep version of this sight, P.O.R.
$65.00

#5 rolling block military rifle Sight.

This sight is the issue sight for the 1897 and 1902 models. It is not the correct sight for the 1910 model. This is a stock photo. Photos of individual sights are available on request. We have several other examples of this sight priced according to condition.

$70.00

Rear sight for a #5 1910 model military Remington RB rifle.

This sight is unique to the 1910 variation of the #5 Rifle. It has the lower elevation ramp as opposed to the high ears of the 1897 or 1902 issues. Fully functional nice condition sight.

Out of Stock
($70.00)

#5 Carbine Rear Sight.

These sights are gray metal and may have minor pitting on the base below the wood line. This is a complete sight with functional ladder and slide bar. All the original stampings are visible.

$65.00

1868 Swede military rear barrel sight.

$65.00

1889 Swede military rear sight.

This sight has the extra wide ladder to include the rear volley sight.
$65.00

#1 Military rifle rear sight screw set.

These are original screws that are correct for the majority of early and late production #1 contract rifles. They will not fit the Argentine model 1879.
$10.00 set, $6.00 each

Screw set for the rear barrel sight on a #5 military rifle.

This includes the 1897, 1902, and 1910 models. This screw set is $6 when ordered w/ the appropriate military rear barrel sight. $10.00 set or $6.00 each

1879 Argentine rear sight Screw Set.

The thread pattern is an obsolete 9-32. Until now, the only source for these has been the occasional used original screw. The screws are available individually or in sets. The two screws are different length, longer front, shorter rear, please specify when ordering an individual screw. $10.00 set, $6.00 each

1879 Argentine rear barrel site

$70.00 , $2.50 each

Rear Sight Screw for the #1 Carbine

This screw is $3 when ordered with the appropriate rear sight.
$6.00

Barrel sight screw set for the #1 sporting rifle

Combined Open and Peep barrel sight as shown in the Remington 1882 catalog. This sight is also shown as # 19 in the 1904 Remington Catalog.
$6.00 ea or $10.00 set

#1 Remington rolling block carbine rear Sight, type 1.

This re-manufactured sight was modeled after an original sight on a Modelo Argentino 1879 carbine. It is furnished in the white so it can be finished to match your carbine. This is the sight identified by George Laymen in his book The Military Remington Rolling Block Rifle as the sight furnished on the majority of export military #1 carbines. These sights are available with blued or antique finish for $60.
$55.00

#1 Remington rolling block Carbine rear Sight, type 2.

This re-manufactured sight was modeled after an original sight on a .43 Spanish carbine. It is furnished in the white so it can be finished to match your carbine. They are not correct for the #5 RB carbine. With blued finish $60.
$55.00

#1 Remington rolling block Carbine Rear Sight, type 3.

This sight has 300 and 500 yard sight notches for the 50 caliber carbines. The sight is furnished in the white so it can be finished to match your carbine. These sights mount with one screw and an integral pin already installed in the sight base. For the #5 RB carbine sight see below. With blued finish $60.
$55.00

Sporting Model Front Sight.

This is the standard front sight on #1, #1 1/2 and #2 sporting model rifles. $36

Tang Peep sight for the #6 Rifle.

Blued Steel.
$50.00

Sight adjustment screw for the #4 and #6 adjustable rear barrel sight.

This is the headless screw that adjusts the elevation of the rear barrel sight (see above). The sight was also used by Remington on other rim fire rifles of the early 1900s. $3.00

#2 tang sight screw.

Front screw for the Lyman or Marbles tang sight on the factory drilled & tapped Remington #2 sporting rifle. This is an obsolete thread pattern only suitable for the original Remington tapped holes. This screw will also work as the front tang sight mounting screw for the #4 rifle. $6.00

Sporting model barrel sight Elevator.

This elevator works for the #1, #1 1/2, and #2 sporting rifles rear barrel sights. Blued steel finish.
$10.00

Adjustable Rear barrel Sight (screw type) model #4 and #6

This is a new manufacture sight. Hot tank blued. This sight was also furnished by Remington on a number of small bore rifles during the early 1900s i.e. Remington .22 cal Repeating Rifle model 12 (1910 catalog) and the model 16 .
$45.00

1910 barrel band front sight base.

This is one of the unique items that differentiates the 1910 model from the 1902. Base manufactured with and without set screw. We also have the set screw available separately.
$15.00 without set screw
$20.00 with set screw

Beach combination Front Sight (or is it Beech)

- New manufacture- available in either 3/8 or the larger original Remington Sporting Model Front dovetail. Two position flip over sight that features a blade in one position and a post inside a circle in the other. Blued steel.
$115.00
Windage adjustable front sight available for $105

Front sight for a #5 Military smokeless powder receiver RB.

This sight will be correct for all but the very limited 1896 variation. Because these are original sights the blade height may vary.

Out of Stock
($20.00)

#1 Military front sight.

These sights were sweated onto the barrel. The bottom of this sight still has some tinning from the original installation.

$10.00

Gallery Sight

Sporting Model Tang Sight for 22 and 32 Rimfire rifles (with mounting screw)
Fits #2 and #4 Rifles
$130.00

1870 Navy & 1871 Army rear barrel sight

Quality reproduction of the original sight.
mounting screw and spanner wrench also available on this website.
$80.00

Graduated Tang Peep Sight

Graduated tang peep sight for #1,
#1 1/2, and Hepburn rifles.

$250.00 Incl. Ship & Ins.

When ordering the above parts please order by the part description. The part numbers are for illustration only and do not reflect any inventory control number. Shipping for the parts above will be charged as $3 for the first part and an additional .50 for each additional part except where noted otherwise.
Payment may be made by check or money order payable to Kenn Womack, 7343 Annette Ave. Fallon, NV 89406