No.2 Straight Bar Extractor |
*No.2 Rotary Extractor |
|
Photo plate taken from Single Shot Rifles and Actions By Frank de Haas |
|
The #2 Remington rolling block is a smaller scale civilian model sporting rifle using a receiver patterned after the 1871 Army pistol. A number of the parts are interchangeable with the 1871, 1891 and 1902 pistols as well as the #7 target rifle. This rifle was produced in a wide variety of rim fire and center fire cartridges. The rim fire models with bar extractors are the most numerous. We have illustrations of both bar extractor and rotary extractor models.
No.2 Straight Bar Extractor |
*No.2 Rotary Extractor |
|
Photo plate taken from Single Shot Rifles and Actions By Frank de Haas |
|
|
Part # |
Description |
Price |
|
2C |
Extractor Retaining Screw |
$6.00 |
|
2F |
Guard Screw |
$6.00 |
|
2B |
Firing Pin Retaining Screw |
$6.00 |
|
2J |
Main Spring |
$25.00 |
|
2H |
Main Spring Screw ($3 when ordered with main spring) |
$6.00 |
|
2K |
Pin Retainer Plate aka Button |
$20.00 |
|
2M |
Pin Plate Screw ($3 when ordered with button) |
$6.00 |
| 2U | Sear Mounting Pin | $3.00 |
|
Tang Sight Mounting Screw (front) |
$6.00 |
|
|
Tang sight hole filler screws. (only correct for factory drilled/tapped holes) |
$10 set |
|
|
2N |
Tang Screw |
$10.00 |
2T |
Trigger |
$40.00 |
| Gallery Tang Sight with mounting screw | $130.00 | |
| 2R | Trigger Mounting Pin | $3.00 |
|
*NOTE - Parts not listed above may be listed on the Original Parts Page subject to availability. |
When ordering the above parts please order by the part description. The part numbers are for illustration only and do not reflect any inventory control number. Shipping for the parts above will be charged as $2.00 for the first part and an additional .50 for each additional part. Payment may be made by check or money order payable to G. S. Womack, 5100 Garden Valley Rd. Garden Valley CA 95633.
Email questions and comments to kgwebay@wildblue.net
530-333-2233 (PST)
Copyright © 2008 G. S. Womack! All rights reserved.
